Full Product Manual

3. Scan Trap Code
Center the trap’s code in the
window on the screen. The trap
code is the QR code located on the
bottom of the mouse trap and the
back of the rat trap. See FAQ page
for images of QR code locations.
4. Connect Mobile Device to Trap
Go to Wi-Fi settings on your device
by pressing the red “GO TO
SETTINGS” button. Select the trap,
which is VICTOR followed by 15
alphanumeric digits.
(Ex: VICTOR-WM170818BE00004).
Press “Connect”, then press the
back button.
If you have trouble successfully
scanning the code, try changing the
distance between the trap and mobile
device. Alternatively you can enter the
15 digit alphanumeric code manually
by pressing the “ENTER CODE
MANUALLY” text found on the bottom
of the screen. Enter the serial number
found next to the QR code on your
trap.
5. Connect Trap to Wi-Fi
Select the Wi-Fi network to connect
the trap to.
Enter the network password for the
Wi-Fi network, then press the red
“Connect” button. It may take up to
1 minute to connect.
6. Connected
A notication appears when the trap
successfully connects. Press the red
“Next” button and continue to step
number 8.
7. Unable to Connect
If your trap did NOT
successfully connect, go to the
Settings menu of your mobile
device, then select the Wi-Fi
option.
Select more options (often can
be found by pressing the
options button in the top right
corner) then select “Saved
Networks.”
Find the trap name
(Ex: VICTOR-WM170818BE00004)
and select it.
Select “FORGET.”
Power trap off, then repeat
steps 1 through 7. If the trap
still does not connect, visit the
Trouble Shooting section or call
1-855-5-VICTOR for
immediate assistance.
• How much bait do I need?
The trap has a bait cup that shows
you exactly how much bait to use.
Do not overll the bait cup. Do not
place bait on the metal plates. Doing
so may interfere with the electrical
functionality and your trap may not
work unless you completely clean
the bait off.
• How do I dispose of a caught
mouse?
Press the power button to turn the
unit “OFF”. Open the kill chamber
door and properly discard rodent.
Clean and bait trap after each use
for most effective results. Press the
power button to turn the unit back
on. The trap will automatically
reconnect to Wi-Fi. Opening and
closing the kill chamber door will
re-arm the mouse trap if it has not
been powered “OFF”.
Important Note: Some screens,
instructions and settings may differ
slightly depending on what device
you are using.
1. Press Power Button
Press the power button to turn the
trap on. The Victor
®
“V” will blink
green 3 times.
2. Press and Hold Wi-Fi Button for
5 Seconds
The Wi-Fi button will blink blue 10
times while the trap is connecting.
• How do I dispose of a caught
rat?
Press the power button to turn the
unit “OFF.” Properly discard rodent.
Clean and bait trap after each use
for most effective results. Press
power button to turn the unit back
on. The trap will automatically
reconnect to Wi-Fi.
8. Name Your Trap
After successful connection,
name the trap and press the
red “Next” button.
9. Bait and Place Trap
Swipe through the three
instruction screens on baiting
and placing the trap, then
press the red “Done button.
Visit the Frequently Asked
Questions section for more
information on baiting and
placing the trap.
10.
Monitor Trap
Stay up to date on trap activity
from anywhere via your
mobile device.
10