User Guide

ManualsBrandsVictor ManualsDesk Accessories & Workspace OrganizersDC200 High Rise Adjustable Stand-Up Desk Converter

Need Help? Watch the video at www.victortech.com/High-Rise

High Rise™ Adjustable Stand-Up

Desk Converter

Assembly Instructions for Model DC200

PRE-ASSEMBLY

• Please read all instructions before beginning assembly. We strongly recommend

you watch the video at www.victortech.com/High-Rise.

• Remove all parts and hardware from box and lay out on a scratch-free work surface,

as this will avoid damaging any parts during assembly. The shipping box provides

an ideal work surface.

• Do not dispose of any contents or packaging material until assembly is complete.

This will help to avoid accidentally discarding small parts or hardware.

• For your safety and ease, adult assembly by two people is recommended.

• Use the parts and hardware lists to identify and separate each of the pieces included

prior to starting assembly.

• Do not use power tools. Use only the included Hex Key (Allen Wrench). Power tools

can damage hardware and split wood.

Missing Parts or UPS Damaged Parts?

For your convenience you can E-mail us at

victor@victortech.com

If you require assistance during assembly, please call our

Customer Service Department

Monday – Friday 8 am to 4 pm CST 1-800-628-2420

Or watch our video at Victortech.com/High-Rise

Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts

are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.

Patent Pending

Summary of content (6 pages)

PAGE 1
High Rise™ Adjustable Stand-Up Desk Converter Assembly Instructions for Model DC200 Patent Pending PRE-ASSEMBLY • Please read all instructions before beginning assembly. We strongly recommend you watch the video at www.victortech.com/High-Rise. • Remove all parts and hardware from box and lay out on a scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
PAGE 2
Parts List Desk Surface Clamp Vertical Support Steel Base Missing Parts? Call 1-800-628-2420 for Victor customer service. Bolt 4 pcs Hex Key 1 pc Need Help? Watch the video at www.victortech.
PAGE 3
Vertical support clamp **NOTE: If clamp comes off vertical support during shipping, or at any time, place the clamp back on the vertical support with the ridge on top. Ridge Lever Step 1 1 2-4 5-6 7 Use the Hex Key to attach the vertical support to the steel base. To do this: 1. Place the steel base on a flat and sturdy table with the felt pads facing down. 2. Using two hands, position the steel base so that one hole from four in the middle is just hanging over the edge of the table. 3.
PAGE 4
Step 2 1 2 3 4 Place the desk surface on top of the vertical support. 1. Ensure the large side of the steel base is facing towards you before attaching the desk surface. The two curves and arch on the steel base will be facing towards you. 2. Position the desk surface so that the height adjustment lever is on the right side. 3. The bottom of the desk surface has a hole in the center. This hole will fit directly on the vertical support. 4. Place the desk surface on top of the vertical support. 5.
PAGE 5
Step 3 Open Closed Knob Lever The desk surface is designed to rotate freely. Rotation promotes subtle side-to-side movement and enhances the benefits of standing. The clamp includes a lever that quickly tightens and loosens the clamp around the piston. With the lever in the open position, the desk surface should rotate freely. With the clamp in the closed position, the desk will rotate slowly or not at all depending on the tightness of the knob.
PAGE 6
Wrong Right **NOTE: The piston that raises and lowers the desk surface is designed to operate with more ease once weight from a computer monitor is applied. If you have difficulty lowering the desk surface, try adding extra weight. You may place items such as books or magazines on the desk surface to assist in lowering. Helpful Tips • • • You will not be able to raise or lower the desk surface when the clamp is locked. If you wish to adjust the height, make sure the clamp is in the open position.