Instruction manual

9
To get the result in multiplication or division.
18. [X] Multiplication key
The multiplication key performs multiplication, automatic constant multiplication
and intermediate sequential operations. It establishes the amount entered or the
previous printed or printed/displayed amount as a constant multiplicand. The X key
also causes the calculator to multiply when you depress the =, %, M+, M-, X or  key.
Each multiplicand entry is retained as a constant (except M+ and M- entries) until
you depress the X, , or CE/C key.
19. [+/-] Sign Change key
Reverse the sign on the display.
20. [%] Delta Percentage
Automatically compares any two amounts and then calculates and prints the
difference and percent of change.
21. [CE/C] Clear Entry / Clear key
Clears a live entry by pressing this key once. Press twice to clear the accumulator
or pending calculation. Does not clear the Memory or Grand total.
22. [0]-[9], [00] & [] Numeric keys.
The calculator uses the conventional 10-key indexing keyboard, and include the
double zero key and decimal point key. Whole numbers are entered exactly as they
are written.
23. [–] Minus key
Subtracts an amount from the accumulator. To subtract the same amount more
than one time (repeat subtraction), enter that amount once and depress the – key
as many times as necessary. If this key is depressed immediately after % key, it
works as percent minus key.
24. [+] Plus key
Adds an amount to the accumulator. To add the same amount more than one time
(repeat addition), enter that amount once and depress the + key as many times as
necessary. If this key is depressed immediately after % key, it works as percent plus
key.
25. [N] Item Count Key
Calculations with item count and/or averaging. Also used to set the N count to
Gross or Net.
26. [# / S] Date / Subtotal Key
# : It will print live entry as an identifier as an invoice number with “#” mark.