Quick Start Guide

2. Attaching a Lens
Example: XCD 45mm Lens
a. Push the lens removal button and remove protection cover lid from the camera body.
b. Rotate the lens so that the red mark on the lens lines up with the red mark on the camera body (please make sure the
lens rear cap has been detached).
c. Mount the lens into the camera body and then turn the lens clockwise to lock its position.
3. Storing Your Images
After shooting, images will be stored in the SD card inserted. When tethered shooting using Phocus, images will only be
stored in your laptop.
Storing in the SD Card
a. Slide the SD Card Slots Lid toward the screen display to open it. Then insert the SD card into SD card slot 1 or 2.
b. When inserting the SD card, make sure its side with the product tag should face toward the touch display. If it is hard to
insert the SD card, turn it around to try again. DO NOT insert the SD card forcibly.
c. Close the slot cover by rotating it counter clockwise and pushing it in place towards the front of the camera (C) to lock
it into position.