Quick Start Guide

49. Battery Release Lever
40. Tripod Thread 1/4”
Downloading the User Manual and Phocus Mobile 2
Before your first use of X1D Mark II, please visit www.hasselblad.com or scan the QR code below to download the X1D
Mark II User Manual. Read and understand the whole manual for how to use this product correctly. Scan the QR code on
the right side to download Phocus Mobile 2. You may either connect your smart device with X1D Mark II using camera’s
Wi-Fi or using the USB Type-C cable. After successful connection, you can control the camera, select exposure mode,
and set shutter speed, ISO, metering mode and etc. remotely.
Download the User Manual Download Phocus Mobile 2
*iOS11.0 and later are required to download Phocus Mobile 2. Android system is not supported.
**Wi-Fi connection will be supported soon.
Using you X1D Mark II
1. Charging the Battery
The battery has been inserted into the camera body before delivery. Please fully charge the battery for the first time use.
a. Slide the Connectors Slot Lid toward the touch display to open it.
b. Connect the camera’s USB-C port with an USB power adapter using the USB type-c cable, and then connect the USB
power adapter to a power outlet (100-220 V，50-60Hz)
To remove the battery, rotate the battery release lever. The battery will move up a bit automatically. Then press the
Battery in a bit but not all the way, to release it from the camera completely. Then remove the battery.