HASSELBLAD X1D Mark II Quick Start Guide V1.
X1D Mark II As a medium format mirrorless digital camera, HASSELBLADTM X1D Mark II features a 43.8 × 32.9 mm CMOS sensor with a color definition of 16 bit. Its dynamic range is 14 stops, and capable of shooting 50 MP stills. Multiple shooting modes are supported, including single shoot, continuous shoot and interval. Its built-in 3.
49. Battery Release Lever 40. Tripod Thread 1/4 ” Downloading the User Manual and Phocus Mobile 2 Before your first use of X1D Mark II, please visit www.hasselblad.com or scan the QR code below to download the X1D Mark II User Manual. Read and understand the whole manual for how to use this product correctly. Scan the QR code on the right side to download Phocus Mobile 2. You may either connect your smart device with X1D Mark II using camera’s Wi-Fi or using the USB Type-C cable.
2. Attaching a Lens Example: XCD 45mm Lens a. Push the lens removal button and remove protection cover lid from the camera body. b. Rotate the lens so that the red mark on the lens lines up with the red mark on the camera body (please make sure the lens rear cap has been detached). c. Mount the lens into the camera body and then turn the lens clockwise to lock its position. 3. Storing Your Images After shooting, images will be stored in the SD card inserted.
Storing in the Laptop using Phocus a. Visit https://www.hasselblad.com/phocus/ to download and install it. b. Slide the Connectors Cover Lid toward the screen display to open it. Then connect the camera’s USB-C port with the laptop using the USB type-C cable. And launch the Phocus. Phocus only supports MAC OS X 10.10 or later；PC：Windows 7（32 and 64 bit） ／ 8 ／ 10 or later. Read Phocus User Manual to know more details about Phocus.
10. Captures Remaining 11. Shot Mode 12. Metering Mode 13. Exposure Mode 14. EV 15. AF Lock 16. Aperture On Control Screen, you can tap each icon to set relevant parameter. If the value or the icon is grey, it means this parameter cannot be changed in current mode. Swipe up from the bottom to enter the menu page. Camera: Set the exposure, image quality, focus, white balance and etc. Settings: Set the connection, display, language, and etc. Tap each icon to enter the sub-menu for detailed information.
2. Run the Phocus Mobile app on your iOS device, and power on the camera. Click “Camera” on the top to check the images saved in the camera’s SD card. Tap an image to edit it (Please note only 3F images can be edited). On the editing page: Tap to adjust the image’s exposure, such as EV, contrast, brightness, recovery, shadow fill, and clarity. Tap to adjust white balance, grey scale, and apply color correction. Tap to apply lens corrections, noise filter, and adjust sharpness.
StorageCapacity 16GBcardholds120imagesonaverage. CaptureRate 3framespersecond UserInterface Display:3.6inchTFTtype,24bitcolor；2.36MP；Touchfunctionality:Yes,fullsupport.Touch interfaceincludingswipe,scrollandpinch/spreadtozoom.Cameragripwithbuttonsand ScrollWheels.Manycamerafunctionsandsettingscanbecontrolledfromatetheredcomputer oriPhone/iPadoverPhocusMobile2. LiveView Oncamera,hostandiOSdevicewithhighframerate.
Compliance Information FCC/ISEDC Compliance Notice This device complies with Part 15 of the FCC Rules and ISEDC licence‐exempt RSS standard. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation.
Informations sur l'exposition RF Ce dispositif (X1D MARK II; modèle X1D MARK II) est conforme aux normes SAR pour les limites d’exposition FCC et ISED non contrôlées et a été testé conformément aux méthodes et procédures de mesure spécifiées dans IEEE1528 et IEC 62209, cet équipement doit être installé et fonctionne avec une distance minimale de 1 cm entre le radiateur et votre visage lorsque le fonctionnement est proche de l’œil.
