User's Guide

www.hasselblad.com
21
QUICK START
CONTENTS
ATTACH THE SHOULDER STRAP
Attach the included shoulder strap to the camera by following
these instructions:
A
Hold or place the camera with the lens pointing down
and one of the strap lugs facing you. Attach the leather
end (1) of the strap to the metal strap lug (2).
B
Open the metal ring (3) with a sharp tool. E.g. a
screwdriver or a small knife. Be careful not to scratch
the camera.
C
Insert the open end of the metal ring into the hole of
the strap lug. Rotate the ring one full turn and make
sure it is fully attached to the strap lug.
D
Finally, slide the plastic fastener (4) down.
Repeat the process for the other side of the camera.
Note!
If the strap is exposed to strong pulling force there is a risk
that the metal rings or the strap itself can be damaged.
Regularly check the condition and replace the rings or the
entire strap if necessary.
907X Special Edition USER GUIDE
1
A
B
C
D
2
4
3