User's Guide
Table Of Contents
- 1 INTRODUCTION
- 2 Quick Start
- 3 Safety
- 4 Parts & Controls
- 5 Using the 907X
- 5.1 Touch display
- 5.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Fixed exposure compensation setting
- Light meter mode
- 5.3 Memory cards
- 5.4 Live view indications
- 5.5 Focusing
- 5.6 Move autofocus point
- 5.7 Resize autofocus point
- 5.8 Browsing, preview and histogram
- 6 Phocus
- 7 Settings
- 8 Accessories
- 9 Appendix
- 未标题
www.hasselblad.com
19
QUICK START
CONTENTS907X Special Edition USER GUIDE
2.2 CHARGING THE BATTERY
BATTERY CHARGER
The camera is supplied with a USB power adapter for charging
the camera battery through the USB port of the camera.
CHARGE THE BATTERY
Turn off the camera and insert the USB-C plug from the
battery charger into the USB socket on the camera (A). Insert
the battery charger into a standard (100–240V~ /50–60 Hz)
domestic socket.
CHARGING FROM THE USB PORT
When the battery is charging, the Status Led (B) indicates
the current charge level by blinking with Orange color. See
illustration to the right. E.g. if the battery has about 50%
charge level, the LED will blink two times and then be turned
off for a short period. The blinking sequence is repeated.
See also Battery Charging Hub accessory on page 122.
One blink = 0% to 25%.
Two blinks = 26% to 50%.
Three blinks = 51% to 75%.
Four blinks = 76% to 95%.
Steady light, 4 sec. = 95% to 100%
B
A