User's Guide
Table Of Contents
- 1 INTRODUCTION
- 2 Quick Start
- 3 Safety
- 4 Parts & Controls
- 5 Using the 907X
- 5.1 Touch display
- 5.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Fixed exposure compensation setting
- Light meter mode
- 5.3 Memory cards
- 5.4 Live view indications
- 5.5 Focusing
- 5.6 Move autofocus point
- 5.7 Resize autofocus point
- 5.8 Browsing, preview and histogram
- 6 Phocus
- 7 Settings
- 8 Accessories
- 9 Appendix
- 未标题
www.hasselblad.com
18
QUICK START
CONTENTS
BATTERY
Make sure the battery is fully charged. See more on the next
page. Open the right side lid by sliding it backwards (A) and
insert the battery with the text facing backwards into the CFV
until it clicks in place. (B)
Note!
When the battery is inserted, the rear status LED will show a
blink sequence once to indicate the current battery charge
level. See next page for details.
SD CARD
Insert the SD card into slot 1 or 2. The contact side of the card
shall be facing towards the rear display (C).
Close the lid by swinging it back and sliding it forward.
For best results, the card should be formatted in the camera
by using the procedure on page 59.
For recommended memory cards, see page 58.
907X Special Edition USER GUIDE
A
B
C