User's Guide
Table Of Contents
- 1 INTRODUCTION
- 2 Quick Start
- 3 Safety
- 4 Parts & Controls
- 5 Using the 907X
- 5.1 Touch display
- 5.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Fixed exposure compensation setting
- Light meter mode
- 5.3 Memory cards
- 5.4 Live view indications
- 5.5 Focusing
- 5.6 Move autofocus point
- 5.7 Resize autofocus point
- 5.8 Browsing, preview and histogram
- 6 Phocus
- 7 Settings
- 8 Accessories
- 9 Appendix
- 未标题
www.hasselblad.com
17
QUICK START
CONTENTS
2.1 QUICK START
Thischapterexplainshowtomaketherstcaptureusingthe
default settings.
FIRMWARE
Makesurethecamerahasthelatestrmwarebychecking
the latest version that you can download at www.hasselblad.
com
.Youcanseethecurrentlyinstalledrmwarebyfollowing
the procedure on page 119. Instructions on how to update
rmwarecanbefoundonpage 114.
ASSEMBLING THE CAMERA
1 Remove the rear protective cover of the 907X camera
body by pressing on the top part (A) and then swinging
the cover backwards (B).
2 Remove the front protective cover of the CFV II 50C by
sliding the lock button (C) in the direction of the arrow and
then swinging the cover outwards (D).
3 Attach the CFV II 50C to the 907X by placing the CFV II
onto the lower supports on the 907X (E).
4 Swing the CFV II towards the camera while holding the
lock button on the open position (F).
5 When the CFV II is attached to the camera, release the lock
button (G) and make sure the CFV II is securely attached to
the 907X.
907X Special Edition USER GUIDE
A
B
E
E
G
F
C
D