Instruction manual
36
Side filter
Press down the sponge into
the dents at four corners, and
set it under the tabs on the
frame.
Bottom filter
Place the sponge
under the tabs on the
frame.
Cleaning the dust filter on the right side
When the dust filter on the right side gets dirty,
partial omissions on the printed cards may occur,
or the print guality looks dirty. If you find the dust
on the filter, you should clean the filter as follows.
1.
Remove the dust on this side vents using a
vacuum cleaner or other cleaning equipment.
4.
Remove dirt on the fan filter using a vacuum
cleaner or other cleaning equipment.
Hold the sponge with your hand so that it is not sucked
into the cleaner.
If the sponge is removed, attach it again as
shown below.
Replace the fan filter when it begins to deteriorate.(The
elasticity of the sponge is lost and the sponge tends to be
broken in to pieces.) Contact your dealer for details of
replacing the filter.