Instruction manual

ManualsBrandsVictor Data Systems ManualsComputer equipmentXID

Operation (continued)

User modes

The settings for printing media, card, etc. can be

made in the User mode.

Press the MENU button when the unit

is in the Ready, Preheat or Error

status to suspend printing

operations.

User mode screen flow

EXIT

>Cleaning>

>Ink>

>Retransfer>

>Buzzer

>Transport mode

>Power Saving

>Bend Remedy>

>Card size

>MG ISO Type

>IC Antenna Pos.

>Counter Reset

>Display>

>IC Contact Pos.

User Mode

>Test Print

Press , and appears on the LCD.

After 0.5 seconds, the display will switch

to the following items.

See p. 33

See p. 27

See p. 33

See p. 31

See p. 37, 38

See p. 29

See p. 30

See p. 31

See p. 28

End of user mode

See p. 32

CAUTION

When you change settings for the

underlined submenu on the next page (Setting the ink

ribbon, Setting the retransfer film, Setting the

retransfer roller temperature, Bend remedy roller

temperature setting and Card setting mode(Card Size

setting)),the message “Please Reset” will appear on

the LCD.

Then initialize the printer by pressing

key and next key.

RESET

ENTER