User guide

UG:105 vicorpower.com Applications Engineering: 800 927.9474 Page 8

List of ConverterPACs used in the PFC MegaPAC and

PFC MegaPAC-High Power and their features

ConverterPAC OVP OCP OTL RS/AS LS/AS PG TrimPot

ModuPAC Std Std Std AS* AS* Opt Opt

JuniorPAC N/A Std N/A AS* AS* Opt Opt

DualPAC N/A Std N/A AS* AS* N/A Opt

RAMPAC N/A Std N/A AS* AS* Opt Opt

BatPAC N/A Std N/A N/A N/A N/A Std

FinPAC** Std Std N/A AS* AS* Opt Opt

FlexPAC Std Std Std LS LS N/A Std

* See pages 12 and 13 for more information on Autosense.

** All the above mentioned ConverterPACs can be used in both the PFC MegaPAC and PFC MegaPAC-

High Power except the FinPAC which currently can only be used in the PFC MegaPAC-High Power.

(The UniPAC - not listed above - cannot be used either in the PFC MegaPAC or the PFC MegaPAC-

High Power. Currently, the UniPAC is only used in the 4 kW MegaPAC.)

Note: All ConverterPACs mentioned above can be paralleled EXCEPT the DualPAC,

JuniorPAC and RamPAC.

Part Numbering

PFC MegaPAC Mpaa-7bcccc-v-xx

p = P for standard chassis p = X for high power chassis

aa = number of outputs

b = number of DC-DC modules and FlexPACs

cccc = customer speciﬁc conﬁguration code

v = optional revision code and may be blank (note: v = G for RoHS compatible

product)

xx = additional option codes

Note: xx = MI for rugged chassis, = MC for rugged chassis with conformal coating

ConverterPAC Xx

V/x

X = ConverterPAC type (For RoHS, add G to current preﬁx)

= Voltage out

= Current out (rounded to 1 decimal point)

= Can be multiple options* (see page 9)