User guide

UG:115 vicorpower.com Applications Engineering: 800 927.9474 Page 26
Current Share Boards - Optional Feature (Cont.)
Figure 14. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
12
34
56
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
Pin Description
1 Power
2T1
3 -V1
4T2
5 -V2
6 No Connection
J1 Pinout
Figure 13. Mechanical Drawing
Specifications:
1. Power: 2 – 50 Vdc at 5 mA maximum.
2. Accuracy: +/-1 mV between -Vout connections.
3. Output current when not trimming up: +/-1 uA (VI-200/J00),
+/-5 µA (Maxi, Mini, Micro series).
4. Use four non-plated through holes with standos for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 series
converters (VI-200/J00).
6. CSB02 MUST be used for current sharing Maxi, Mini, Micro series
converters (Maxi, Mini and Micros).
PLEASE NOTE: THE CSB IS NOT INTENDED FOR HOT-SWAP APPLICATIONS.