User guide

UG:115 vicorpower.com Applications Engineering: 800 927.9474 Page 10
PFC Mini Mechanical Drawing
12.03 305.56
12.16 308.86
6.00 152.40
12.49 ±.02 317.29 ±0.51
.34 ±.02 8.64 ±0.51
2
2
J3-1 E/D-1 J3-2 E/D-2 J3-3 E/D-3 J3-4 SIGNAL GROUND J3-5 VCC +5V 300mA J3-6 ACOK AC POWER OK J3-7 GSD GENERAL SHUTDOWN J3-8 SPARE J3-9 SPARE
MATING HDWR: (AMP P/N: OR EQUIVALENT) HOUSING: AMP P/N: 205204-4 TERMINALS: AMP P/N: 66506-9 SCREW LOCK: AMP P/N: 205980-4 CRIMP TOOL: AMP 58448-3
J3 INTERFACE PIN OUT J3 INTERFACE CONNECTION
2
NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERPRET DRAWING PER ANSI Y14.5-1994. WITH OPTIONAL BUSBAR. A COMPLETE SET OF MATING CONNECTORS CAN
BE PURCHASED FROMWESTCOR BY SPECIFYING CONNECTOR KIT P/N: 19-130047
REF DESIGNATION LEGEND
MB = MOTHER BOARD
S1 = (SLOT 1) DAUGHTERBOARD MODULES E/D 1. S2 = (SLOT 2) DAUGHTERBOARD MODULES E/D 2. S3 = (SLOT 3) DAUGHTERBOARD MODULES E/D 3.
4
3
S3JX
S2JX
S1JX
3
3
3 4
4
2.00 50.80
.47 11.94
8.00 203.20
CUSTOMER MOUNTING HOLES: 2X #8-32 X .156 or M4 X 4mm MAX LG. FROM OUTSIDE OF POWER SUPPLY
8.00 203.20 2.00 50.80
1.00 25.40
4.00 101.60
CUSTOMER MOUNTING HOLES: 4X #8-32 X .156 or M4 X 4mm MAX LG. FROM OUTSIDE OF POWER SUPPLY
BOTTOM VIEW
SCALE: 1:2
4
AIR FLOW
SEE PAGE 11 FOR DETAILED OUTPUT CONNECTION INFORMATION
NOTE: FOR INCREASED OUTPUT POWER, CURRENT SHARE BOARDS ARE AVAILABLE. WITH VI-200/VI-J00 MODULES CSB-01 WITH MAXI/MINI MODULES CSB-02 SEE PAGE 21 AND 22 FOR MORE INFORMATION ON CURRENT SHARE BOARDS.
All Westcor power supplies can now be configured online using VSPOC, the online configurator tool available on vicorpower.com
MBJ1 INPUT CONNECTIONS
MBJ1-1 EARTH GROUND MBJ1-2 L2 / NEUTRAL MBJ1-3 L1
L1
47 TO 500 Hz 300VDC --- 115-230 VAC 10A
EARTH GND WITHOUT OPERATE
DO NOT
L2/N
NOTE: SET SCREW MAX
TORQUE = 4.4 IN. LBS.
5.268 133.81
1.72 ±.02 43.69 ±0.51
2.210 56.13 1.600 40.64
.487 12.36
.920 23.37
CLAMPING SCREWS
14 AWG WIRE
5 1
9 6