Specifications

Rev. 4/2010 Vicor 800-735-6200 Westcor Division 408-522-5280 Applications Engineering 800-927-9474 Pg. 11
PFC MegaPAC Design Guide
ConverterPAC Output and Connector Pin Identification for the PFC MegaPAC
Note:
1. All ConverterPACs except the FinPAC occupy one slot. The FinPAC occupies two slots.
2. New output studs were installed on the ConverterPACs and are 1/8th inch longer. Refer to pages 12 and 19 for more information.
BatPAC
VOLTAGE LIMIT ADJUST
J2 (BATPAC REMOTE INTERFACE)
CURRENT MONITOR
CURRENT LIMIT ADJUST
- VOUT
VOLTAGE LIMIT ADJUST
1
- VOUT
3
2
4
J3-PIN1
CURRENT LIMIT ADJUST
CRIMP TOOL MOLEX P/N: 57005-5000
TERMINALS- MOLEX P/N: 30-00-0031
HOUSING- MOLEX P/N: 39-01-0043
MATING HDWR:
+ V0UT
P2 REMOTE SENSE TRIM/SC & POWER GOOD
POWER GOOD INVERTED
TRIM
5
3
2
4
1
SIGNAL GROUND
POWER GOOD
Vcc IN
7
6
+SENSE
-SENSE
TERMINALS- MOLEX P/N: 39-00-0031
HOUSING- MOLEX P/N: 39-01-0073
CRIMP TOOL MOLEX P/N: 57005-5000
MATING HDWR:
P2-PIN1
- OUT
+ 0UT
OUTPUT ADJUST
FinPAC
M-1 STATUS
M-1 VOLTAGE ADJUSTMENT
M-4 STATUS
M-3 STATUS
M-2 VOLTAGE ADJUSTMENT
M-2 STATUS
M-4 VOLTAGE ADJUSTMENT
M-3 VOLTAGE ADJUSTMENT
CONNECTOR J1
FlexPAC
MATING HDWR:
HOUSING MOLEX P/N 39-01-2120
TERMINALS MOLEX P/N 39-00-0039
CRIMP TOOL MOLEX P/N 11-01-0197