Specifications
Current Share Boards - Optional Feature (contd)
Specifications:
1. Power: 2-50Vdc at 5mA maximum.
2. Accuracy: +/- 1mV between -Vout connections.
3. Output current when not trimming up: +/- 1uA (VI-200/J00), +/-5uA (2nd Generation).
4. Use 4 non-plated through holes with standoffs for mounting.
5. CSB01 MUST be used for current sharing 1st Generation converters (VI-200/J00).
6. CSB02 MUST be used for current sharing 2nd Generation converters (Maxi, Mini and Micros).
***PLEASE NOTE, THE CSB IS NOT INTENDED FOR HOTSWAP APPLICATIONS***
Contact your Regional Applications Engineer at 1-800-927-9474 for additional information.
Pg 22 Vicor 800-735-6200 Westcor Division 408-522-5280 Applications Engineering 800-927-9474 Rev. 6/2004
PFC MegaPAC-EL/PFC MegaPAC-High Power Low Noise
Figure 3. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
12
34
56
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
Pin Description
1 Power
2T1
3 -V1
4T2
5 -V2
6 No Connection
J1 Pinout
Figure 2. Mechanical Drawing