User Guide

8
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2015
© 2015 Viconics Technologies. All rights reserved.
VT8600 SeriesUser Interface Guide
WIRELESS ECOSYSTEM
When wireless sensors are set up to communicate with a room controller, the functioning of each such sensor is described in a
separate Zone screen, up to a maximum of 10 Zones. Select the appropriate type of sensor based on the required functioning using
the up and down arrow keys.
Set function to
Status
1/10 Zone
Battery
No
Paired
0x0000
IEEE addr.
None
Closed
Normal
Permit join
On
Set function to
Status
10/10 Zone
Battery
No
Paired
0x0000
IEEE addr.
None
Closed
Normal
PARAMETER DETAILS
Conguration parameters default value Signicance and adjustments
Set function to
Describe function of specied wireless sensor
Default value: None
None: No sensor function congured for this zone
Door: Sensor is a door contact switch
Window: Sensor is a window contact switch
Motion: Sensor is a motion sensor
Status: Updates the BACnet status of the sensor, but no action
is taken by the internal logic of the controller.
Remove: Selecting this function clears the zone of the settings
for the attached sensor. However, the sensor will automatically
try to reconnect with the room controller unless it is manually
reset as well.
Status
Current status of information received from the sensor
Read only
Close: Sensor in closed state (door/window only)
Open: Sensor in opened state (door/window only)
No motion: Sensor detects no motion (motion sensor only)
Motion: Sensor detects motion (motion sensor only)
None: No status information received from sensor.
Battery
Current status of sensor battery, if any.
Read only
Low: Battery power level is low, replacement or recharge will be
needed soon
Normal: Battery power level is in the normal range, replacement
or recharge is not currently needed.
None: Sensor does not use a battery
Paired
Sensor pairing state
Read only
No: Sensor is not paired with the room controller
Yes: Sensor is paired with the room controller
Invalid: Sensor cannot be paired.
Identical to ZigBee
settings display
parameter, see
page 12