User Guide

VT8600 Series
41
User Interface Guide
© 2014 Viconics Technologies. All rights reserved.
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2
Setpoint adjustment for heating mode
In automatic mode, setpoint showing at the top of the set point bar located directly under the blue line represents the actual occupied
cooling setpoint.
During occupied setpoints adjustment, large digits are temporarily used to display the occupied Cooling
Setpoint or occupied Heating Setpoint. The actual setpoint is dependent on the last effective demand (heating or cooling). The setpoint
on top of the red line represents the actual occupied heating setpoint. The differential between the occupied heating and cooling set-
point is dened by the minimum deadband conguration parameter.
Normal temperature display resumes after setpoints are adjusted and the actual occupied heating and cooling setpoints show in the
setpoint bar.
Automatic Heating/Cooling Mode