User Guide

VT8600 Series
3
User Interface Guide
© 2014 Viconics Technologies. All rights reserved.
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2
Enter Set-up Screen
Touch and hold this point
for 3 seconds to enter setup mode
Note: If a conguration/installer password is
activated to prevent unauthorised access to the
conguration menu parameters, a password
entry prompt shows to prevent access to device
conguration components.
SET-UP SCREEN DISPLAY 1/2
Return to
home screen
1/2 Setup
Network
Configuration
Setpoints - Display
Service View
Test Outputs
Language Selection
Discover Mode The Controller
becomes discoverable on the wireless
ZigBee
®
network for 1 minute (this
button is hidden if ZigBee
®
settings are
not congured)
Note: The following menus show according to context:
- ZigBee menu shows if ZigBee card detected.
- Network choice inside does not show if no network is avail-
able
Enter BACnet
®
& ZigBee
®
network settings (only if ZigBee is detected)
Enter parameter conguration menu
Enter setpoint and display settings
Enter output testing mode
Enter status and service view
Enter language selection
General Note:
Adjustable parameter
Nonadjustable parameter
Indicates invisible conditional
eld. Appears based only
on model, presence of a
ZigBee® wireless adapter
module or presence of a
Lua script, depending on the
eld.