Install Instructions
Viconics Technologies Inc. | 9245 Langelier Blvd. | St.-Leonard | Quebec | Canada | H1P 3K9 | Tel: (514) 321-5660 | Fa x : (514 ) 321-4150
028-0450-00
www.viconics.com | sales@viconics.com November 2014
© 2014 Viconics TEchnologies. All rights reserved.
VT8000 Series
6
ZigBee Pairing Procedure
Building Expert loads to the default page.
CONFIGURE MANAGER
1. In Building Expert, click Configuration tab.
2. In Controller Settings (CFG1), set Adjust Time, Save Period, Time Zone Offset, and Enable DST (if applicable).
3. Toggle Enable.
4. In Ethernet Settings (ETH1), set IP, Netmask, Gateway, DNS, and Email Source with the appropriate addresses for your
network.
5. Click on Devices window, and select your MPM. Then scroll down the main Explorer tab window and select ZigBee Configuration.
OR
Click Configuration tab of the main window and go to ZigBee Settings (ZBC1) section.