Install Instructions
Viconics Technologies Inc. | 9245 Langelier Blvd. | St.-Leonard | Quebec | Canada | H1P 3K9 | Tel: (514) 321-5660 | Fa x : (514 ) 321-4150
028-0450-00
www.viconics.com | sales@viconics.com November 2014
© 2014 Viconics TEchnologies. All rights reserved.
VT8000 Series
12
ZigBee Pairing Procedure
Set Permit Join and Pair ZigBee Sensor(s)
The following procedure assumes the Room Controller is either stand-alone or has already been bound to a MPM acting as a coordinator.
See Appendix A for information on how to pair a ZigBee sensor with a Room Controller bound to a MPM in a network including multiple
MPMs.
PERMIT JOIN
Ensure that the Room Controller (or the MPM, if used) has the Permit Join parameter set to On
• For Room Controllers, this is on the second ZigBee settings screen, or on the first Wireless Ecosystem Zone screen.
• For MPMs, Permit Join is one of the ZigBee settings accessible as described previously.
2/2 Zigbee others
Door status
Closed
Door installed
Yes
Window status
Closed
Win. installed
Yes
Permit join
On
Battery alarm
Off
Set function to
Status
1/10 Zone
Battery
No
Paired
0x0000
IEEE address
None
Closed
Normal
Permit join
On