Submittal Sheet

TYPICAL ZONE CONTROLLER APPLICATION
VT8300 Room Controller Features
Mixed-Voltage Applications SC1300/SC2300
The VT8300 can be used for mixed-voltage applications by
incorporating a SC1300 (110/130 V) or SC2300 (220/240 V)
mixed-voltage relay. For SC1300/SC2300 relay pack features,
consult the SC1300/SC2300 specification sheet.
VT8300 as a Zone Controller
The VT83000 can also be used as a Zone Controller to control ON/
OFF, floating, or 0 to 10 Vdc heating or cooling terminal equipment
such as pressure dependent VAVs, Valves, and other end devices.
Cooling only VVT zone with reheat
• Fin-tube radiators
• Cabinet heaters
• Radiant panel heaters
• Electric re-heat zones
• Pressure dependent VAV system
• Terminal reheat
The above options are similar to those provided by the VT7200 series
Room Controllers.
5
Return air
VT8300
Low Voltage Fan Coil Terminal
Equipment Controller
Cooling only VAV Heating coil
To Difuser
Baseboard Reheat
Standard wired BACnet MS/TP communication and
optional ZigBee Pro communicatio module upgrade
BACnet MS/TP
Wired communication protocol
TYPICAL LOW VOLTAGE FAN COIL APPLICATION
Optional Wireless Accessories
Return air
VT8300
Low Voltage Fan Coil
Terminal Equipment Controller
3 Speed fan Cooling coil Heating coil
Supply air
Existing field wires
Filter status switch Fan status switch
Standard wired BACnet
MS/TP communication
and optional ZigBee Pro
communication module
upgrade
ZigBee
®
Pro
Optional wireless communication
SED-WDS Door and Window Switch
SED-WMS Wall-Mounted Motion Sensor
SED-CMS Ceiling-Mounted Motion Sensor