User's Manual

English
© 2016 Schneider Electric. All rights reserved.
Wiser Air Installation Guide 1-855-559-4737 www.wiserair.com
Installing Wiser Air
1. Disconnect power to the HVAC system by turning off the breaker.
2. Remove the existing thermostat’s panel from the wall without disconnecting the
wiring.
3. Take a picture of the wiring of the terminal connections (Fig. 1). To prevent
confusion, label the wires.
Figure 1 :
Removal of existing thermostat
and photograph of wiring.
TIP: To verify the compatibility of your unit, please visit www.wiserair.com/compatibility
8