User's Manual
SED - WIN and SED - DOR
3
Wireless Door/Window Switch
All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice.
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 http://www.schneider-electric.com/buildings
II-SE8000-SEDWINDOR-US.EN.10.2013.v1 October 2013
© 2013 Schneider Electric. All rights reserved.
Operation Overview
SED-WIN and SED-DOR series Zigbee Pro™ wireless switches are used with
wireless versions of SERx3XX Series Fan Coil Terminal Equipment Controllers.
A typical hospitality application SERx3xx wall terminal equipment
controller has an on-board PIR sensor. Wireless switches monitor opening
and closing of doors and windows. Wireless door switches used with local
SERx3xx PIR cover provide advanced local occupancy routines allowing for
increased energy savings during occupied hours without sacrificing
occupant comfort.
Wireless window switches monitor outside windows and/or opening/closing of
patio/balcony doors, which prevents unnecessary energy consumption.
Applications of SERx3xx Series Fan Coil Terminal Equipment
Controllers with SED-WIN and SED-DOR series Zigbee Pro™ wireless switches
can be used in network ready mode, with or without integration to a central
management system. This allows for advanced functions such as central reser-
vation occupancy functions.
A combination of up to twenty SED-WIN and SED-DOR door and/or window
switches can be used simultaneously with a single device. The SED-WIN and
SED-DOR switches are factory delivered with 2 AAA batteries and can be
installed, configured, and used right out of the box. Due to extremely small cur-
rent consumption of the switches, the expected battery life is
approximately 10 years.
No tools are required for commissioning or servicing the door switch. A very
simple interface with an on-board LED and hidden switch provides the required
functions for local interaction. Local information for battery life and connectivity
(heartbeat) are provided at the SERx3xx Series Fan Coil
Terminal Equipment Controller local display level, or through the Zigbee Pro™
wireless network. Each switch is also factory supplied with a magnet, locking
security tamper proof screw, and self tapping mounting screws for installation.
Model Chart
PART NUMBER DESCRIPTION
SED-WIN-P-5000
Wireless Window Switch
(Patio and balcony doors)
Complete with magnet, batteries, and required mounting hardware.
SED-DOR-P-5000
Wireless Door Switch
Complete with magnet, batteries, and required mounting hardware.
Verify if device is wireless window switch or wireless door switch:
Remove battery for 60 seconds and then insert again. Power cycle switch and
verify LED blinking pattern to confirm if it is a window switch or door switch.
Part Number Number of Blinks
Window Switch (SED-WIN-P-5000) 2 blinks
Door Switch (SED-DOR-P-5000)
3 blinks
WARNING: Respect polarity when replacing batteries or the switch may be
damaged. The (+) and (–) terminals are indicated on the board.
NOTE: Magnet is located on opposite side of security screw.
LED
(switch side)
Pull Tab
(remove to power
up
switch.)
Hidden
Switch
Figure-3 Wireless Switch Components
Figure-4
Magnet Components and Proper Magnet Orientation
Housing
Magnet