User's Manual
SED - WIN and SED - DOR
10
Wireless Door/Window Switch
All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice.
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 http://www.schneider-electric.com/buildings
II-SE8000-SEDWINDOR-US.EN.10.2013.v1 October 2013
© 2013 Schneider Electric. All rights reserved.
Battery Status
To verify battery strength of the wireless switch, jump switch
for 4+ seconds and less than 10 seconds and ensure a blinking pattern shows. After the blinking pattern
shows, the switch enters diagnostic mode for 10 seconds.
Number of Blinks Indication
1 blink Replace batteries
2 blinks Replace batteries soon
3 blinks Battery strength is fair
4 blinks Battery strength is good
5 blinks Battery strength is excellent
Important: Respect polarity when replacing batteries. Reversing polarity of batteries can damage wireless
switch.
Specifications
Power requirements 3.0 VDC 2 x AAA batteries. Factory supplied
Operating conditions
0 °C - 50 °C ( 32 °F to 122 °F )
0% - 95% R.H. non-condensing
Storage conditions
-30 °C - 65 °C ( -22 °F to 122 °F )
0% - 95% R.H. non-condensing
Agency approvals for all models CE: RTTE 1999/5/EC
Agency approvals for wireless models FCC compliant to: Part 15, Subpart C
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT
Check with your local government for instruction on disposal of this product