User's Manual

VWA5000W Wireless Switch Specifications

Power requirements: 3.0 Vdc 2 x AAA batteries. Factory supplied

Operating conditions: 0 °C to 50 °C ( 32 °F to 122 °F )

0% to 95% R.H. non-condensing

Storage conditions: -30 °C to 50 °C ( -22 °F to 122 °F )

0% to 95% R.H. non-condensing

(PENDING) Agency Approvals all models

CE: RTTE 1999/5/EC

(PENDING) Agency Approvals Wireless models

FCC: Compliant to: Part 15, Subpart C

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT

ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENSE-EXEMPT RSS STANDARD(S). OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND (2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION OF THE DEVICE.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY

UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT

Drawing & Dimensions

Switch & Switch Base Dimensions

Magnet & Magnet Base Dimensions

Important Notice

All VWA5000W series

devices are for use as

operating controls only

and are not safety

devices. These instruments have

undergone rigorous tests and

verifications prior to shipment to

ensure proper and reliable operation in

the field. Whenever a control failure

could lead to personal injury and/or

loss of property, it becomes the

responsibility of the user / installer /

electrical system designer to

incorporate safety devices ( such as

relays, flow switch, thermal

protections, etc…) and/or alarm

system to protect the entire system

against such catastrophic failures.

Tampering of the devices or miss

application of the device will void

warranty.