User guide

2. Installation

For the network camera to operate, it is necessary to connect a network cable for data transmission

and power connection from customer-supplied power supply.

2.1 Overview

 Parts and Description

① Main Power 24VAC/12VDC (↑(+) pole /↓(-) pole)

② RJ45(PoE) Port

③ Micro-SD Card Slot

④ Alarm & Audio In/Out Port

⑤ Status LED

Upon boot-up, green and red are both on for a short time and then only green will be on.

If red is lit, this indicates a failure (no picture); if flashing green and no red,

this indicates a good picture is displaying.

⑥ Service Monitor Port