User guide

70
6) Maintenance
• Maintenance
- Restart: The unit is restarted without changing any of the settings. Use this method if the
unit is not behaving as expected.
- Reset: The unit is restarted and most current settings are reset to factory default values.
The settings that are not affected are:
* the boot protocol (DHCP or static)
* the static IP address
* the default router
* the subnet mask
* the system time
- Default: The default button should be used with caution. Pressing this will return all of the
network camera's settings to the factory default values (including the IP address).
• Upgrade
Upgrade the camera by importing an upgrade file and pressing the Upgrade button. During the
upgrade, do not turn off the power of the network camera. After waiting at least five minutes, try
to access the camera again.
To perform an update for multiple cameras at one time, use the SmartManager discovery and
update tool and select them using the SHIFT and CTRL keys (see SmartManager manual for
details).
• Backup
Click the Backup button to save setting values that users enter to the network camera to a user
PC.