User guide

66
• NAT traversal Settings
- Enable: Click this button to enable NAT traversal. When enabled, the network camera
attempts to configure port mapping in a NAT router on your network, using UPnP.
Note that UPnP must be enabled in the network camera (see System>Network>UPnP).
Enter a NAT router and enter the external port number for the router in the field provided.
If you enter o in those fields, the network camera automatically searches for NAT
routers on your network.
Notes:
- If you attempt to manually enter a port that is already in use, an alert message will be
displayed.
- When the port is selected automatically it is displayed in this field. To change this enter a
new port number and click Save.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.