User guide

62
 RTP
Create a setting for sending and receiving an audio or video on a real-time basis. These settings are
the IP address, port number, and Time-To-Live value (TTL) to use for the media stream(s) in
multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast
streams.
• Port Range
- Start port: Enter a value between 30000 and 39920
- End port: Enter a value between 30000 and 39920
• Multicast
This function is for sending Video and Audio to Multicast group.
- Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.
- RTP port: Enter a value between 1024 and 65530.