User guide

55
 IP Filtering
Checking the "Enable IP address filtering" box enables the IP address filtering function. When the IP
address filter is enabled, addresses added to the list are set as allowed or denied addresses. All other
IP addresses not in this list will then be allowed or denied access accordingly, that is, if the addresses
in the list are allowed, then all others are denied access, and vice versa.
Note that users from IP addresses that will be allowed must also be registered with the appropriate
access rights (Guest, Operator or Administrator). This is done from Setup> System>Security>Users.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.