User guide

 HTTPS

For greater security, the network camera can be configured to use HTTPS (Hypertext Transfer

Protocol over SSL (Secure Socket Layer)), so that all communication that would otherwise go via HTTP

will instead go via an encrypted HTTPS connection.

• HTTPS Connection Policy

Choose the form of connection you wish to use from the drop-down list for the administrator,

Operator and Viewer to enable HTTPS connection (set to HTTP by default).

- HTTP

- HTTPS

- HTTP & HTTPS

• Private Certificate

To use HTTPS for communication with the network camera, an official certificate issued by a CA

(Certificate Authority) must be uploaded from your PC. Provide the path to the certificate directly,

or use the Browse button to locate it. Then click the Upload button.

Refer to the home page of your preferred CA for information on where to send the request

When the settings are complete, click Save, or click Reset to revert to previously saved settings.