User guide

50
The event map allows you to change the settings and establish a schedule for each event trigger from
the network camera; up to a max. 15 events can be registered.
Click the Add button to make a new event map; a popup window displays as below. To change an
existing event, select that event and click the Modify button; this same window will display and the
information can be changed as required. Selecting an event and clicking Remove deletes the event.
• General
Enter the name for a new event map.
• Event In
Select an event type in the drop down list.
• Event Out
Select checkbox for those features you want to use.
- E-mail: Select email addresses you want to send via email that an event has occurred.
- FTP: Record and save images to an FTP server when an event has occurred.
- HTTP Server: Send notification messages to an HTTP server that listens for these.
The destination server must first be configured on the Event In page. Enter a message
you want to send.
- Audio Alert: Select an Audio alert file that the network camera output when audio alert
event triggered. The Audio alert file must first be configured on the Event In page.
Record: Record video stream when an event has occurred. The Record option must first be
configured on the Event Out page.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.