User guide

45
• HTTP Server Setting
- URL: The network address to the server and the script that will handle the request.
For example: http://192.168.12.244/cgi-bin/upload.cgi
- Port: Enter the port number used by the HTTP server. The default is 80.
- User name/Password: Provide your log-in information.
• HTTP Server Test
When the setup is complete, the connection can be tested by clicking the Test button.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
 Alarm Out
When the network camera detects an event, it can control external equipment connected to its alarm
output port.
• Enable alarm out
Click the Enable alarm out checkbox to enable the Alarm Out port.
-
Type: The default setting is NO.
* NO: Normally Open
* NC: Normally Close
When the settings are complete, click Save, or click Reset to revert to previously saved settings.