User guide

31
 AE & AWB
• Exposure Control
This page provides access to set the exposure and white balance of the network camera.
Configure the exposure settings to suit the image quality requirements in relation to lighting
consideration.
- Mode: Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto mode.
* Automatic: Automatically sets the amount of light detected by the image sensor.
* Hold Current: Fixes the exposure at its current state.
- Value: Select a value (1-10) in the drop-down list to tune the exposure.
The default setting is 5.
- AGC: Select a maximum value for AGC (Auto Gain Control); specify the level according to
the screen luminance.
- Enable Backlight compensation: Provides the options for BLC.
- Enable Flicker free: Provides the options for flicker.
* 50Hz: Select at 50 Hz environments.
* 60Hz: Select at 60 Hz environments.
- Enable Long Exposure: Select this checkbox to activate the electronic long shutter of the
camera.
* Max. Shutter: Select a shutter speed value (1/15, 1/8, 1/4) in the drop-down list.
The default setting is 1/4.