User guide

25
• Stream2 Setting
Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate
and quality helps to control the bandwidth and storage used by the Motion JPEG video stream in
these situations. Limiting the frame rate and quality optimizes bandwidth and storage usage, but
may give poor image quality. To prevent increased bandwidth and storage usage, the Resolution,
Frame rate, and Quality should be set to an optimal value.
- JPEG resolution: Same as the Stream1 Resolution Setting.
- JPEG frame rate: Same as the Stream1 Framerate Setting.
JPEG quality: Select the picture quality. If users want to have a high quality fast image
one after the other, decrease the value. For general monitoring purposes, do not change a
basic value. Such act may cause a problem to the system performance.
• Stream3 Setting
Use the same as the Stream1 settings. The resolution of Stream3 depends on Stream1 or
Stream2. Select the Stream1 resolution or the Stream2 resolution.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
4) Audio
The network camera can transmit audio to other clients using an external microphone and can play
audio received from other clients by attaching a speaker. The Setup page has an Audio menu, which
allows different audio configurations, such as full duplex.
• Audio Setting
- Enable audio:
Check the box to enable audio in the video stream.