User guide

20
3.5 Network Camera Setup
This section describes how to configure the network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools, and Operators, who have access
to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.
The network camera is configured by clicking Setup in the top right-hand corner of the Live View page.
Click on to access the online help that explains the setup tools.
When accessing the network camera for the first time,
the “Admin Password” dialog appears. Enter your admin
name and password, set by the administrator.
Note: If the password is lost, the network camera must
be reset to the factory default settings. See “3.8
Resetting to the Factory Default Settings”. The default
administrator username is ADMIN and password is 1234.
3.5.1 Basic Configuration
The device information is displayed on the Basic Configuration page.