User guide

6) Maintenance

• Maintenance Server

- Restart: The unit is restarted without changing any of the settings. Use this method if

the unit is not behaving as expected.

- Reset: The unit is restarted and most current settings are reset to factory default values.

The settings that are not affected are:

* the boot protocol (DHCP or static)

* the static IP address

* the default router

* the subnet mask

* the system time

- Default: The default button should be used with caution. Pressing this will return all of the

Network Camera's settings to the factory default values (including the IP address).

• Upgrade

Upgrade the camera by importing an upgrade file and pressing the Upgrade button. During the

upgrade, do not turn off the power to the Network Camera. After waiting at least five minutes,

try to access the camera again.

• Backup

Click the Backup button to save setting values that users enter to the network camera to a user

PC.