User guide

• NAT traversal Settings
- Enable - when enabled, the network transmitters attempt to configure port mapping in a
NAT router on your network, using UPnP. Note that UPnP must be enabled in the
Network Camera (see System>Network>UPnP).
* Automatic setting: The Network Camera automatically searches for NAT routers on your
network.
* Manual setting: Select this option to manually select a NAT router and enter the external
port number for the router in the field provided.
Notes:
- If you attempt to manually enter a port that is already in use, an alert message will be displayed.
- When the port is selected automatically it is displayed in this field. To change this, enter a new
port number and click Save.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
62