User guide

To ensure that the login procedure is performed as securely as possible when using
SMTP authentication, you must define the weakest authentication method allowed.
- Login Method: Set the Weakest method allowed to the highest/safest method
supported by the mail server. The most secure method is listed in the drop-down list:
Login / Plain
• SMTP (E-Mail) Receiver
- Receiver: Enter an email address. You can also register the e-mail address of up to 8
recipients.
• SMTP (E-Mail) Test
- Receiver: Enter an email address and click the Test button to test that the mail servers are
functioning and that the email address is valid.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
 FTP & JPEG
When the Network Camera detects an event, it can record and save images to an FTP server. Images
can be sent as e-mail attachments. Check the box to enable the service.
• FTP Setting
- Server: Enter the server's IP address or host name. Note that a DNS server must be
specified in the TCP/IP network settings if using a host name.
- Port: Enter the port number used by the FTP server. The default is 21.
- Use passive mode: Under normal circumstances the Network Camera simply requests the
target FTP server to open the data connection. Checking this box issues a PASV command to
the FTP server and establishes a passive FTP connection, whereby the Network Camera
44