User guide

Note: The default administrator username is “ADMIN” and password is “1234”. If the password is lost,
the Network Camera must be reset to the factory default settings. See “3.8 Resetting to the Factory
Default Settings”.
To prevent network eavesdropping when setting the admin password, this can be done via an
encrypted HTTPS connection, which requires an HTTPS certificate (see note below).
To set the password via a standard HTTP connection, enter it directly in the first dialog shown below.
To set the password via an encrypted HTTPS connection, see “3.5.4 System > Security > HTTPS”.
Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between
web browsers and servers. The HTTPS certificate controls the encrypted exchange of information.
3.4 Live View Page
The live view page comes in several screen modes, including 704x480 (576), 640x480, 352x240 (288),
and 320x240. Users select the most suitable one for their particular installation. Adjust the mode in
accordance with your PC specifications and monitoring purposes.
24