User guide

6) 3D DNR: 3D DNR OFF/LOW/MIDDLE/HIGH Setting

(Adjust NOISE when low light condition)

7) D_ZOOM: D_ZOOM ON/OFF Setting.

Adjustable from X1.0 to X3.0

Change left/right, up/down. Show ZOOM,PAN,TILT amount (shows on the right side of the bottom)

8) SLC: Side Light Compensation can adjust the brightness of the image in the corners of the screen.

It can be turned ON or OFF (default). ON allows settings of 0-50.

9) ECLIPSE: Highlight Mask Exposure is ON or OFF (default) selectable.

Eclipse Level Setting (Brightness of Eclipse is adjustable)

10) DIS: DIS ON/OFF Setting (Digital Image Stabilization)

11) RETURN: Return to Main menu.

Press the [ENTER] button to access the “MOTION DET.” Mode

1) MOTION: Motion ON/OFF Setting

2) SET WINDOW: Set the range when using motion detection function.

Set the screen range for motion detection. (240 cells can be selected or deselected)

This feature allows you to detect the movement of an object in 240 different areas of the screen and display an

alarm on the screen.

3) ALL SET: Set entire screen as a range for motion.

4) ALL CLEAR:

Cancel entire screen range setting for motion.

5) SENSITI.:

Adjust sensitivity when using motion detection.

As the sensitivity level increases, smaller movements are detected

6) SHOW INDI.: Motion defected indicator can be selected as OFF / ICON / TRACE

7) DELAY OUT:

Alarm signal display on the screen is delayed from 1sec to 15sec

8) RETURN:

Return to Main menu.

Press the [ENTER] button to access the “PRIVACY SET” Mode

1) MASK1: MASK1 Screen setting

2) MASK2:

MASK2 Screen setting

3) MASK3:

MASK3 Screen setting

4) MASK4:

MASK4 Screen setting

5) MASK5:

MASK5 Screen setting

6) MASK6:

MASK6 Screen setting

7) RETURN:

Return to Main menu.

Select MASK1~6 (Set from 1 to 6 where wish to be hidden). Mask Range can be adjusted; can set in different