Product specifications

V-CELL-HD Quick Installation Guide
Use this scale to control the volume of the speakers.
Use this scale to control the volume of the microphone.
3) Video Streams
The network camera provides several images and video stream formats. Your requirements and
the properties of your network will determine the type you use.
The Live View page in network camera provides access to H.264, MPEG-4 and Motion JPEG video
streams, and to the list of available video streams. Other applications and clients can also access
these video streams/images directly, without going via the Live View page.
3.5 Resetting to the factory default settings
To reset the network camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in “3.5.7 System > Maintenance” of the User’s Manual) or use the Reset button
(SW1) on the board of the dome camera, as described below:
•
Using the Reset Button
Follow the instructions below to reset the network camera to the factory default settings using
the Reset button.
1. Switch off the network camera by disconnecting the power adapter.
2. Open the camera mount assembly.
3. Press and hold the Control Button (SW1) on the board with your finger while reconnecting
the power.
4. Keep the Control button (SW1) pressed for about 2 seconds.
5. Release the Control Button (SW1).
6. The network camera resets to factory defaults and restarts after completing the factory
reset.
7. Close the camera mount assembly.
CAUTION: When performing a Factory Reset, any previously saved settings will be lost.
(Default IP 192.168.1.100)
11