Specifications

Page 41 of 61
SPECIFICATIONS (CONTINUED)
a. Scheduler/Macro.
b. Reports.
c. Setup.
d. Logout.
12. The software shall provide an advanced method for creating and executing software commands.
This shall be achieved by the use of macros. Macro configuration shall be defined for recorded
cameras and microphones, command duration, recording location, local viewing, device ID,
picture quality, refresh mode, recording rate (fps), related devices (sensors) and alarm activation.
13. Macros shall allow an authorized user to create and schedule software commands that shall include
but are not limited to:
a. Sequencing cameras, including multi-screen displays on selected monitors.
b. Execute remote macros existing on recorders currently connected to the network.
c. Record cameras at different qualities and frame rates from any recorder on the network.
d. Send an alarm condition to any recorder and workstation on the network. By the use of
macros, an authorized user shall be able to program the destination component of the alarm
condition.
e. An authorized user shall be able to program and execute macros remotely without the need
to be physically located at the recorder that the macros will be programmed on.
f. The Schedule/Macro button shall allow the running of preconfigured combinations of
camera, sensor and PTZ programmed routines.
g. Macro scheduling shall include but is not limited to:
• Days of the week when a macro is active.
• Start and end time for when a macro is active.
• If a macro is to run continuously or not.
h. A macro shall be able to run every 5 min, 10 min, 1/4 hour, 1/2 hour, 3/4 hour, 1 hour, 2
hours, 3 hours, 4 hours, 6 hours, 8 hours and 12 hours.
14. The Network Settings and Site Name utility shall allow:
a. Setup of a system Nucleus, which is the central station of the VMS.
b. Time synchronization of all components on the network.
c. All appropriate networking features including each server IP, Subnet and Gateway.
15. There shall be a Language Translation Utility (LTU). It shall allow a manual translation of the
entire GUI into any language that uses varying alpha-numeric character sets. The utility shall also
store files for simple changing from one language to another.
WORKSTATION SPECIFICATIONS
Operating System:
Microsoft® Windows® 7 Ultimate.
CPU:
Intel® Core™ i7-920 processor.
RAM:
4 GB.
Hard Drive:
250 GB minimum.
Video Card: Sapphire ATI HD 5650.
Power Supply:
750 W minimum.