Specifications

Page 36 of 61
SPECIFICATIONS (CONTINUED)
ACCESSORIES
1. SV-WMT: Wall Mount
2. SV-PMT: Pendant Mount
3. SV-FMA: Flush Mount
4. MD-PMA: Pole Mount
5. MD-CRMA: Corner Mount
6. MV-EBA: Electrical Box Adaptor
7. SV-EBA: Electrical Box Adapter
8. SV-JBA: Junction Box Adapter
OPTICS
4mm, F1.8, Horizontal FOV=96°
WARRANTY
Three (3) years, parts and labor
APPROVED MANUFACTURERS
The camera shall be a Arecont Vision model AV8365x series Panoramic IP Camera
CORNER-MOUNTED CELL CAMERA
1. The indoor high-security camera shall incorporate housing, camera, lens and 36 IR illuminators;
the brightness of the IR illuminators shall be adjustable. Its design shall be specifically for use in
custodial suites and prison cells. The high-resolution day/night camera shall be available with an
integral 2.5 mm wide angle lens.
2. The camera shall be waterproof and shall fit into a 90° corner. It shall consist of a two part
stainless steel assembly, a fixed mounting frame and a removable front plate. The front plate shall
be recessed and secured to the fixed frame with security screws. The front plate shall have two 10
mm thick windows to protect the camera and IR LED illuminators. Once installed, it shall be able
to be permanently sealed to the wall to make the housing ligature proof.
3. The camera shall support proprietary H.264, MPEG-4 and M-JPEG compression. The camera
shall have an adjustable mount that shall allow it to be tilted up or down for an exact view.
4. The camera shall be powered by PoE, 12 VDC or 24 VAC.
5. The camera shall provide alarms and audio. Privacy masks shall be available.
6. The camera shall meet or exceed the following design and performance specifications.
DAY/NIGHT CAMERA SPECIFICATIONS
1. Imaging Device: 1/3-inch CCD
2. Horizontal Resolution: 640 TVL (b&w); 600 TVL (color)
3. Synchronization: Line lock
4. Camera Type: Day/night (electronic)
5. Signal-to-Noise Ratio: 50 dB (AGC off)
6. Sensitivity: Day:0.01 fc (0.1 lux);
a. Night: 0.003 fc (0.03 lux