Product specifications

EXAMPLES OF CAMERA/DVR SETTING & OPRERATION
A. DVR Menu setting
A-1. Menu Æ Camera Setup Æ PTZ Setup
Model No : PELCO-D or VICON
PTZ ID : 0~255 (In case of “0”, it is normally not used)
Baud Rate: 9600
A-2. Menu Æ System Setup Æ DVR ID
DVR ID : 0 ~ 255(In case of “0”, it is normally not used)
B. Keyboard setting (No need to change it because it is set as the default)
B-1. Enter Setting mode : “1” +”1”+ ”SEL” (Push “SEL” button in 3 seconds)
B-2. Camera control Baud rate :
1. Baud rate #1 : Master 2400 (in case protocol is TPro201)
1. Baud rate #1 : Master 4800 (in case protocol is VICON)
B-3. DVR control Baud rate : 2. Baud rate #2 : Slave 9600
B-4. Protocol : 3. Protocol : TPro 201 (Same as PELCO-D), VICON
B-5. Exit after saving the setting value : 9. Save and Exit
C. Keyboard operation
There is DVR mode and Camera model on Keyboard.
Change DVR mode : DVR ID + “DVR” button
Change Camera mode: CAMERA ID + “CAM” button or CAMERA ID + “MATRIX” button
C-1. How to operate DVR
1. Select DVR : “ 1 ”(DVR ID) + “ DVR ” button
2. Example to operate
2.1 Menu setting screen On/Off : “ Menu ” button
2.2 Change Live screen : “ 1~16 “ + “ Enter “, “ 0 “ + “ Enter “, “Multi”
2.3 Playback start : “ Play ” button
- 21 –