Installation guide

5
2.1 Assign IP address
The default setting of the V992D-IR is set “DHCP” to ON. If you have a DHCP server on your
network and UPnP function enabled on your PC you can find the network V992D-IR in “My
network”.
If a DHCP server is not available on your network, assign IP address by the following process:
Execute Multi-Upgrade Tool (from the Installation CD). It will search V992D-IRs on the network
automatically.
1) After the list of detected devices appears, select the V992D-IR you are trying to
configure.
2) Select the Network type as Static or DHCP. If Static is selected, enter all of the network
information for your V992D-IR.
3) Select the “Change IP Address” button. The message “Do you want to change IP
address?” will display; select “Yes” from the pop-up window.
4) Check the Type as Static or DHCP from the list.
When you double click the V992D-IR within the list, the default web browser (Internet
Explorer or compatible equivalent) will open and automatically connect to the V992D-IR.
The V992D-N4 can be accessed with most standard operating systems and browsers. The
recommended browser is Internet Explorer® 7 and above for Windows®.