Installation guide

22
network information for your V992D-IR.
3) Select the “Change IP Address” button. The message “Do you want to change IP
address?” will display; select “Yes” from the pop-up window.
4) Check the Type as Static or DHCP from the list.
When you double-click the V992D-IR within the list, the default web browser (Internet
Explorer or compatible equivalent) will open and automatically connect to the V992D-IR.
4.6.2 Service Port
Service Port
HTTP port
The default HTTP port number (80) could be changed to any port within the valid port
range (1-65535). This is useful for simple port mapping.
RTSP port
The RTSP protocol allows a connecting client to start an H.264 stream. Enter the RTSP
port number to use. The default setting is 554.
NOTE: After changing the default port numbers, the user can use the ‘Multi Upgrade Tool’ to
search and connect automatically if they can’t remember the specific port numbers
that they used.