Installation guide

5
2.2 Assign IP address
The default setting of the camera is set “DHCP” to ON. If you have a DHCP server on your
network and UPnP function enabled on your PC you can find the network camera in “My
network”.
If a DHCP server is not available on your network, assign IP address by the following process:
Execute Multi-Upgrade Tool (from the Installation CD). It will search cameras on the network
automatically.
1) After the list of detected devices appears, select the camera you are trying to configure.
2) Select the Network type as Static or DHCP. If Static is selected, enter all of the network
information for your camera.
3) Select the “Change IP Address” button. The message “Do you want to change IP
address?” will display; select “Yes” from the pop-up window.
4) Check the Type as Static or DHCP from the list.
When you double click the camera within the list, the default web browser (Internet
Explorer or compatible equivalent) will open and automatically connect to the camera.
The V992D-N4 can be accessed with most standard operating systems and browsers. The
recommended browser is Internet Explorer® 7 and above for Windows®.